 |
| 07.08.2008 |
|
|
|
|
|
|
SIHIextruvac |
|
|
We are pleased to announce the release of two special close-coupled vacuum pump models designed specifically to handle the profile extrusion market. The new SIHIextruvac pump supplies vacuum to either wet or dry calibration tables with the added ability to handle up to 30 USgpm!
In the plastic extrusion process, moldable plastics, often in the form of pellets are heated and forced through dies of the desired shape. Subsequently, the extruded profile passes to a calibration table where vacuum is used to ensure the final profile matches the desired shape and dimensions. Water is used continuously during the calibration process to permit controlled cooling of the profile. The vacuum pump must there-fore be capable of handling air/water mixtures, and in some cases large water flows.
The SIHIextruvac is applied to the handling and exhausting of dry and humid gases. These pumps are applied in all fields where a pressure of 100 to 900 mbar must be created by robust vacuum pumps. The SIHIextruvac (or LEME) is specially designed to handle additional water that is exhaust through the suction inlet.
During operation the pump must continuously be supplied with service liquid, normally water, in order to eliminate the heat resulting from the gas compression and to replenish the liquid ring, because part of the liquid is leaving the pump together with the gas. It is possible to reuse the service liquid. The pumps are equipped with a device by which the contaminated service liquid can continuously be drained during operation (dirt drain), if necessary.
SIHIextruvac Features:
- non-polluting due to nearly isothermal compression
|
- low noise and nearly free from vibration
|
- oil-free, as no lubrication in the working chamber
|
- shaft not contact with the medium
|
- handling of nearly all gases and vapours
|
- protection against cavitation as standard
|
- able to handle water carry over
|
- incorporated central drain
|
- wide choice of material for application versatility
|
|
- easy maintenance and reliable operation
|
- no metallic contact of the rotating parts
|
| SIHIextruvac Technical Data: |
|
SIHIextruvac Industries: |
|
| Note: Refer to the factory. |
|
|
|
| |
|
|
|
| SIHIextruvac Applications: |
|
Accessories: |
|
|
|
|
|
|
Download LEME SIHIextruvac Series brochure |
|
|
|
|
|
